U-Line Ice Maker Error Code E8
Error code E8 on a U-Line ice maker indicates a malfunction of the ice maker thermistor. The thermistor is a temperature sensor that is used to monitor the temperature of the ice maker. When the thermistor malfunctions, it can cause the ice maker to stop working properly.
There are several possible causes of error code E8:
- Damaged thermistor: The thermistor may be damaged due to wear and tear, exposure to extreme temperatures, or electrical problems.
- Loose or damaged connections: The wires connecting the thermistor to the control board may be loose or damaged, disrupting communication and causing the error code.
- Failure of the control board: The control board may be faulty, causing it to misread the thermistor’s readings.
If you see error code E8 on your U-Line ice maker, you can try the following troubleshooting steps:
- Unplug the ice maker for 10 minutes and then plug it back in. This can sometimes reset the system and resolve minor issues.
- Check the thermistor connections. Locate the thermistor and inspect the wires connecting it to the control board. Ensure they are securely fastened and free of any damage.
- Replace the thermistor. If the thermistor is damaged, it will need to be replaced.
If you have tried all of these troubleshooting steps and the error code still appears, you may need to call a qualified technician for help.
To help prevent error code E8, you can do the following:
- Keep your ice maker clean and free of debris. Debris can build up around the thermistor and interfere with its readings.
- Avoid exposing your ice maker to extreme temperatures. Extreme temperatures can damage the thermistor.
- Have your ice maker regularly serviced by a qualified technician. A technician can inspect the thermistor and other components for signs of wear and tear.