Jenn-Air Oven not self-cleaning
IS THE CONTROL LOCK ON?
To unlock:
- Press and hold START (on single oven) or the lower START (on double ovens) for 3 seconds to unlock
- No keypads will function with the controls locked.
Refer to your Owner’s Manual for more information on setting Self-Clean or Control Lock.
HAS A HOUSEHOLD CIRCUIT BREAKER TRIPPED OR FUSE BLOWN?
Check to make sure a household fuse has not blown or that a circuit breaker has tripped. Reset the circuit breaker or replace the fuse if necessary. If the problem continues, contact a licensed electrician.
If not resolved, please note the following:
- Do not continue to attempt to operate the wall oven.
- Disconnect the power cord and/or turn off the circuit breaker that controls the appliance.
DID YOU SET THE OVEN CONTROLS FOR A SELF-CLEAN CYCLE OR A DELAY START SELF-CLEAN?
To set a Self-Clean cycle:
- Close the oven door, then press CLEAN MODES.
- For double ovens only: Press the “1” or “2” number keypad to select the desired oven to clean.
- Press the number “1” keypad for Precise Clean.
- Press START.
- To set a Delay Start Self-Clean cycle:
- Close the oven door, and then press START TIME.
- For double ovens only: Press the “1” or “2” number keypad to select the desired oven to clean.
- Press the number keypads to enter the desired amount of time by which you want to delay the start.
- Press CLEAN MODES.
- Press the number “1” keypad for Precise Clean.
- Press START.
Refer to your Owner’s Manual for more information on setting a Self-Clean cycle.
IS THE OVEN DOOR OPEN?
Make sure the oven door is closed all the way.
IS THE OVEN DOOR LATCHING?
Unlike other functions, self-clean will only work when the door is closed and properly latched. Close the door and listen for the door to latch when starting the self-clean cycle.