Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment

Fisher Paykel Oven Error Code F3

Fisher Paykel Oven Error Code F3 indicates that the oven temperature has been sensed at over 600°F (315°C) during normal cooking operation. This could lead to issues with the appliance’s performance and cooking accuracy. Here’s a detailed breakdown of the error code and the recommended procedures for troubleshooting:

Possible Causes:

  1. Temperature Sensor Fault: Begin by checking for a malfunction in the temperature sensor. The sensor is responsible for monitoring the oven’s temperature, and if it’s faulty, it may inaccurately detect higher temperatures.
  2. Oven Element Faults: Inspect the oven’s heating elements for any faults. Malfunctions in the elements can lead to excessive heat, triggering the F3 error code.

Troubleshooting Steps:

  1. Temperature Sensor Check:

    • Locate the temperature sensor within the oven. It is usually positioned near the back wall.
    • Inspect the sensor for any visible damage or disconnection.
    • Use a multimeter to measure the resistance of the sensor. Compare the reading to the manufacturer’s specifications. If it deviates significantly, the sensor may need replacement.

  2. Oven Element Inspection:

    • Check the baking and broiling elements for any visible damage, such as breaks or burns.
    • Use a multimeter to test the continuity of each element. A lack of continuity indicates a faulty element that should be replaced.

  3. Power Module Replacement:

    • If no faults are found in the temperature sensor or oven elements, consider replacing the power module. The power module is a key component that controls various functions, including temperature regulation.

Important Note: Always ensure that the oven is unplugged or the power source is disconnected before attempting any inspections or replacements to guarantee safety.

By following these troubleshooting steps, you can identify and address the issues associated with Fisher Paykel Oven Error Code F3, restoring your oven to proper working condition. If you encounter challenges during the process or the problem persists, it’s advisable to seek professional assistance for a more in-depth diagnosis

Schedule Appointment