Fisher Paykel Oven Error Code “—”

If your Fisher Paykel oven displays the error code “—,” accompanied by an unresponsive control panel and a temperature indicator showing dashes, it indicates a specific issue that requires attention. Here’s a detailed troubleshooting guide to help you resolve this error:

Symptoms:

• Temperature indicator shows “—.”
• Control panel is unresponsive.
• Control panel is locked.

Solution:

1. Control Panel Lock:

   The “— “error often occurs when the control panel is locked. This feature is designed to prevent accidental changes to the settings during cooking.

2. Unlocking the Control Panel:

   To unlock the control panel, locate the select or cancel button on your oven’s control panel. Press and hold the select or cancel button for a few seconds until you see a response from the control panel.

3. Wait for Confirmation:

   After holding the button, wait for a visual or audible confirmation that the control panel is unlocked. The dashes on the temperature indicator should disappear, and the control panel should become responsive again.

4. Test the Functionality:

   Once the control panel is unlocked, test the functionality of the dials and buttons. Set the oven to a desired temperature and observe if it responds appropriately.

5. Power Cycle (if necessary):

   If the issue persists, consider performing a power cycle by turning off the oven at the main power source. Wait for a few minutes before turning the power back on.

Note: Always refer to your oven’s user manual for model-specific instructions and guidelines. If you are unsure about any step or if the problem persists, contacting a professional technician is recommended for a thorough assessment and resolution.