Dacor Refrigerator Error Code F2

The F2 error code on a Dacor refrigerator indicates that the refrigerator temperature is too low.

This can be caused by a number of factors, including:

• Thermostat setting: Make sure that the thermostat is set to the correct temperature. The ideal temperature for a refrigerator is 37°F (3°C).
• Defrost system: The defrost system is responsible for melting ice buildup on the evaporator coils. If the defrost system is not working properly, it can cause the refrigerator temperature to drop.
• Door seal: A leaky door seal can allow warm air to enter the refrigerator, which can lower the temperature.

Troubleshooting the F2 Error Code

Here are some steps you can take to troubleshoot the F2 error code on your Dacor refrigerator:

1. Check the thermostat setting. Make sure that the thermostat is set to the correct temperature. The ideal temperature for a refrigerator is 37°F (3°C).
2. Check the defrost system. The defrost system is responsible for melting ice buildup on the evaporator coils. If the defrost system is not working properly, it can cause the refrigerator temperature to drop. To check the defrost system, follow these steps:
   • Unplug the refrigerator.
   • Remove the back panel of the refrigerator.
   • Inspect the evaporator coils for ice buildup.
   • If there is ice buildup, you will need to defrost the refrigerator. To do this, follow these steps:
     • Turn the refrigerator back on.
     • Let the refrigerator run for a few hours.
     • Check the evaporator coils again.
     • If the ice buildup is gone, the defrost system is working properly.
     • If the ice buildup is still there, you will need to replace the defrost timer or defrost heater.
3. Check the door seal. A leaky door seal can allow warm air to enter the refrigerator, which can lower the temperature. To check the door seal, follow these steps:
   • Close the refrigerator door.
   • Insert a piece of paper between the door and the cabinet.
   • Try to pull the paper out.
   • If the paper pulls out easily, the door seal is leaky.
   • You will need to replace the door seal.

If you have tried all of these steps and the F2 error code is still appearing, you should contact a qualified technician for further diagnosis and repair.