Amana Oven / Ranges Error Code F5, F6, F8
If your Amana electric oven or range is displaying error codes F5, F6, or F8, it indicates a problem with the Electronic Range Control (ERC). These error codes typically point to a failed ERC, and the recommended solution is to replace it. However, before you decide to replace the part or seek professional assistance, there are some DIY solutions you can try to troubleshoot the issue.
Error Code F5:
Error code F5 generally signals a problem with the ERC’s watchdog function, indicating a potential communication breakdown. Here are some DIY steps to address this issue:
- Power Reset:
- Turn off the power to your Amana oven or range at the circuit breaker.
- Wait for a few minutes before restoring power.
- Check Wiring:
- Inspect the wiring connecting the ERC to other components. Look for any loose or damaged connections.
- If you find any issues, carefully reconnect or replace the damaged wiring.
- ERC Replacement:
- If the issue persists after the above steps, consider replacing the ERC. Contact Amana customer support or a qualified technician for guidance on obtaining the correct replacement part.
Error Code F6:
F6 indicates a failure in the ERC’s oven temperature sensor circuit. Follow these DIY steps to troubleshoot:
- Inspect Oven Sensor:
- Check the oven temperature sensor for any visible damage or signs of wear.
- Clean the sensor with a soft brush or cloth to ensure accurate temperature readings.
- Resistance Test:
- Use a multimeter to measure the resistance of the oven sensor. Refer to your appliance’s manual for the appropriate resistance values.
- If the resistance is outside the specified range, consider replacing the oven sensor.
- ERC Replacement:
- If the sensor checks out, but the error persists, the ERC may need replacement. Consult with Amana customer support or a professional technician to obtain the correct part.
Error Code F8:
F8 points to a failure in the ERC’s self-clean latch circuit. Here’s what you can do:
- Check Latch Mechanism:
- Inspect the oven’s self-clean latch mechanism for any obstructions or damage.
- Ensure that the latch moves freely and is not jammed.
- Power Reset:
- Perform a power reset by turning off the circuit breaker for a few minutes and then restoring power.
- ERC Replacement:
- If the issue persists, consider replacing the ERC. Contact Amana support or a professional technician for guidance on obtaining the correct replacement.
Remember, if these DIY solutions do not resolve the issue, it’s advisable to seek assistance from a qualified appliance technician or contact Amana customer support for further guidance on replacing the Electronic Range Control.
Schedule Appointment