Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment

Dryer repair service in Los Angeles

dryer repair services

Sometimes the dryers do not function properly and there’s no Los Angeles dryer repair near me. Often they work too long, and sometimes – too noisy. They do not turn off automatically when dry clothes are loaded. These dryer repair service problems are very annoying. But when you load laundry into the drum, press Start, and nothing happens? This is so annoying!

If this happens, the first thing to check is power. Make sure the dryer is connected. And check that the circuit breaker that powers the drum did not work. It is probably necessary to call a dryer repair service man for troubleshooting. He will find the root of the problem in one of the following reasons. Thermal fuse dryer is designed to prevent fire by turning off the power when the dryer overheats. It cannot be reset. If burned for a good reason or mistakenly, then it must be replaced.

The start switch on the control panel of the dryer may not work. If so, it should be replaced. Another possible reason – the door switch is broken. The door switch is designed to prevent the drum from operating when the door is open. If it does not function, it stops the operation of the drum. Some dryers also have an on / off switch. If it is broken, it may prevent the drum from functioning correctly. Do not attempt to repair the device yourself if you do not have the appropriate skills. In most cases, this will lead to additional breakdowns or delays in repairs. Search for dryer repair service.

A motor that rotates the dryer drum may have problems. This is quite rare, but if it does happen, the engine must be replaced, since it cannot be restored. Search for dryer repair service. In addition, it is possible that it functions perfectly, but the drive belt, which transmits power from the engine to the drum, is defective. Search for dryer repair service. Sometimes belts can work at all with wear and a long time. If you hear the rumble of the motor when you start the drum, but it does not turn around – this is a sign of a belt drive problem.

A timer can rarely cause a drum break, as it will not work at all. Timer defects more often manifest themselves through other symptoms, such as a drum that runs too long or stops prematurely. Search for dryer repair service. Sometimes, however, the timer may fail in such a way that the drum will not work at all. When this happens, a replacement timer is needed.

A problem with the main control board may cause the dryer to stop. This is the least likely reason. But defects sometimes appear in the control board, and when this happens, its replacement is the only option. Find the best dryer repair service and call the specialists.

Schedule Appointment