Viking Refrigerator Error Code E2

If your Viking refrigerator displays Error Code E2 on the control panel, it signals a problem with the condenser fan motor. This particular error code warrants attention to ensure the optimal functioning of your refrigerator.

Potential Causes of Viking Refrigerator Error Code E2:

1. Disconnected Wires: Check for disconnected wires around the condenser fan motor. If the wires are loose or unplugged, reconnect them securely.
2. Faulty Condenser Fan Motor: The error code may be indicating a malfunction in the condenser fan motor. Use a multimeter to check for continuity in the motor. If there is no continuity, it suggests a fault in the motor.

Step-by-Step Troubleshooting:

1. Visual Inspection:

   • Examine the area around the condenser fan motor for any visibly disconnected wires. If found, securely reconnect them.

2. Multimeter Testing:

   • Using a multimeter, check the condenser fan motor for continuity.
   • Set the multimeter to the ohms setting.
   • Place the multimeter probes on the motor terminals.
   • If there is no continuity (an open circuit), it indicates a faulty motor.

3. Replacement of the Motor:

   • If the multimeter test reveals a lack of continuity, it’s advisable to replace the condenser fan motor.
   • Ensure to source the correct replacement motor compatible with your Viking refrigerator model.