Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Miele Dishwasher Error Codes

Miele Dishwasher Error Code F24

The Miele dishwasher, with its reputation for precision and efficiency, is a staple in many households. However, even this high-end appliance may occasionally throw a curveball in the form of error codes. One such error code, F24, points to an issue with the heater relay. Let’s dive into the intricacies of this error and how to address it.

Understanding the F24 Error: Heater Relay Fault

The heater relay in your Miele dishwasher is a critical component that collaborates with the heat pressure switch to activate the heating element. When all is well, it ensures that your dishwasher operates effectively, providing you with sparkling clean dishes. However, when the heater relay encounters a fault, it signals its distress through the F24 fault code displayed on your Miele dishwasher’s control panel.

Diagnosing the Issue: Checking the Heater Relay

To tackle the F24 error, you’ll need to roll up your sleeves and delve into your dishwasher’s inner workings. Here’s a step-by-step guide:

  1. Access the Dishwasher: First and foremost, ensure your dishwasher is safely disconnected from the power source. Safety always comes first.
  2. Open the Dishwasher: Gently open the dishwasher door to access the interior.
  3. Locate the Heater Relay: The heater relay is typically situated near the heating element, and you’ll often find it attached to the control board.
  4. Inspect for Damage: Carefully examine the heater relay for any signs of damage. This may include fused contacts or, in more severe cases, waterlogged wires. The presence of damage is a clear indicator of the issue at hand.

Resolving the F24 Error: Replacing the Heater Relay

If your investigation reveals that the heater relay is indeed damaged, replacing it is the most effective course of action. While this task may seem daunting, it’s a manageable repair for those with some DIY experience.

To replace the heater relay:

  1. Obtain a Replacement: Ensure you have a compatible replacement heater relay on hand. This can often be found through authorized Miele parts dealers or appliance repair shops.
  2. Carefully Disconnect Wires: Before removing the damaged heater relay, take note of the wire connections. Gently disconnect these wires, ensuring you remember their positions.
  3. Remove the Faulty Relay: Unscrew or unclip the faulty heater relay from its mounting point within the dishwasher.
  4. Install the New Relay: Secure the replacement heater relay in place, reattaching any screws or clips as needed.
  5. Reconnect the Wires: Using your notes from earlier, reconnect the wires to the new relay.
  6. Test the Dishwasher: With the replacement relay in position, restore power to the dishwasher and run a test cycle to ensure the F24 error is no longer present.

Schedule Appointment