Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Kitchenaid Oven Error Codes

Kitchenaid Oven Error Code F3/E0

Encountering the F3/E0 error code on your KitchenAid oven signals a potential issue with the upper oven temperature sensor. This crucial component ensures precise temperature regulation for optimal cooking results. Here’s a detailed breakdown to guide you through understanding and resolving this error.

Error Description:

The F3/E0 error indicates a defect in the upper oven temperature sensor. This sensor plays a vital role in monitoring and adjusting the oven’s temperature, ensuring accurate cooking and baking processes.

Troubleshooting Steps:

  1. Disconnect Power: Disconnect electrical power from the oven before proceeding with any troubleshooting. Safety is paramount.
  2. Inspect Wiring: Examine the upper oven temperature sensor and its wiring. Reconnect any loose wires on the sensor. Damaged wiring may contribute to the error; in such cases, replace the upper oven temperature sensor wire harness.
  3. Resistance Check: Use a volt/ohm meter to measure the resistance of the upper oven temperature sensor. At a temperature of 70°F, the resistance should read 1080 ohms. If the resistance deviates from this value, consider replacing the upper oven temperature sensor.
  4. Sensor Replacement: If the resistance is not within the specified range or if the sensor appears faulty, it is recommended to replace the upper oven temperature sensor. This step ensures accurate temperature readings during operation.
  5. Evaluate Wire Harness: Assess the condition of the wire harness connected to the upper oven temperature sensor. If damage is detected, replace the wire harness to maintain the integrity of the oven’s temperature control system.
  6. Electronic Oven Control Board Replacement: Should the issue persist after checking the sensor and wire harness, the next step involves replacing the electronic oven control board. This component governs the oven’s various functions, and a malfunction could contribute to the F3/E0 error.

For a thorough assessment and resolution of the F3/E0 error, especially if you encounter challenges during the troubleshooting process, it is advisable to seek the expertise of professionals. Appliance Repair Los Angeles stands ready to assist, ensuring your KitchenAid oven operates flawlessly once again.

Schedule Appointment