Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Kenmore Washer Error Codes

Kenmore Washer Error Code dL

A washing machine is a vital appliance in most households, and when it encounters an error, it can be frustrating. One common error code that Kenmore washing machine users may come across is “dL,” which indicates that the door isn’t locking properly. In this article, we’ll delve into the causes of this error and provide a step-by-step guide on how to fix it, ensuring your laundry routine runs smoothly.

Understanding Kenmore Washer Error Code dL: Door Isn’t Locking:

The “dL” error code on your Kenmore washer signifies that the door isn’t locking as it should during the wash cycle. This can be problematic because the washer needs the door to be securely locked for it to start the cycle. If the door doesn’t lock, the washer won’t operate.

Causes of the Error:

Several factors can contribute to the “dL” error code:

  1. Obstruction: Sometimes, foreign objects or clothing can get in the way, preventing the door from closing and locking properly.
  2. Dirty Lock Sensors: Over time, the lock sensors may accumulate dirt or residue, hindering their ability to sense when the door is closed.

How to Fix Kenmore Washer Error Code dL:

Step 1: Check for Obstructions

  • Before diving into more technical solutions, start with a simple visual inspection. Ensure that there are no obstructions in the door’s path. Remove any objects or clothing that might be blocking the door from closing properly.

Step 2: Clean the Lock Sensors

  • If there are no visible obstructions, the next step is to clean the lock sensors. To do this, follow these steps:
    • Dip a cotton swab into rubbing alcohol.
    • Gently clean the lock sensors located on the door and the corresponding sensor on the washer’s body. These sensors are responsible for detecting whether the door is closed securely.
    • Be thorough in your cleaning to ensure all dirt, grime, or residue is removed.

Step 3: Clear the Error Code

  • After cleaning the sensors, press the “STOP” button on your Kenmore washer to clear the “dL” error code from the display.

Step 4: Test the Washer

  • Close the door and initiate a test wash cycle to see if the problem is resolved. The door should now lock correctly, allowing the washer to run without issues.

Schedule Appointment