Kenmore Range Error Code F11

Kenmore ranges are known for their reliability, but occasionally, an error code like F11 can appear, signaling a communications problem between the oven control board and the cooktop control board. Understanding and addressing this issue is crucial to getting your range back in working order. In this article, we’ll explore the F11 error code and provide you with detailed steps to diagnose and resolve it.

What Does Error Code F11 Mean?

Error code F11 indicates a communication breakdown between the oven control board and the cooktop control board. This can result from loose or damaged wire harness connections between these components.

Step 1: Unplug the Range

Safety is a top priority. Start by unplugging the range from the electrical outlet to avoid any electrical hazards while troubleshooting.

Step 2: Inspect Wire Harness Connections

• Carefully examine the wire harness connection between the oven control board and cooktop control board. Ensure that all connections are secure and no wires are visibly damaged or broken.

Step 3: Repair or Reconnect

• If you find loose or disconnected wires, reconnect them securely. If any wires are damaged, it’s crucial to repair or replace them. Faulty connections can often be the root cause of the F11 error.

Step 4: Reset the Oven Control Board

• To reset the oven control board, follow these steps:
  • Press the “Lower Stop” button.
  • Hold down the “Lower Bake” and “Lower Broil” keys simultaneously for 3 seconds.
  • Release the keys and press “Lower Stop” again.
  • Once more, press and hold “Lower Bake” and “Lower Broil” for 3 seconds.

Step 5: Check for the Error Code

• After performing the reset, check if the F11 error code returns. If it doesn’t, your range may be back in working order. However, if the code reappears, further action is needed.

Step 6: Replace the Oven Control Board

• If the F11 error code persists, it’s time to replace the oven control board. A malfunctioning control board can lead to communication errors. Consult your Kenmore range’s user manual for specific instructions on replacing the oven control board.

Step 7: Reset the Oven Control Board Again

• After replacing the oven control board, reset it using the same procedure as described in step 4.

Step 8: Replace the Cooktop Control Board

• If, after replacing the oven control board and resetting it, the F11 error code still lingers, it’s advisable to replace the cooktop control board. The issue may be originating from this component.