Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Fisher Paykel Dryer Major Issues

Fisher Paykel Dryer Not Turning On

If your Fisher Paykel dryer is not turning on, it can be a frustrating issue. Here’s a step-by-step guide to troubleshoot and potentially resolve the problem:

  1. Check Power Supply:

    Ensure that the dryer is properly plugged into a functioning power outlet. Confirm that the circuit breaker for the dryer is not tripped. Reset it if necessary.

  2. Inspect Power Cord:

    Examine the power cord for any visible damage or frayed wires. If found, replace the power cord.

  3. Verify Door Switch:

    The door switch is a safety feature that prevents the dryer from starting if the door is open. Make sure the door is securely closed. Check the door switch for any signs of damage or wear. If faulty, it may need to be replaced.

  4. Examine Start Switch:

    Inspect the start switch for any visible damage. If the switch is damaged, it may not send the signal to start the dryer. If needed, replace the start switch.

  5. Check Thermal Fuse:

    The thermal fuse is a safety device that cuts off power if the dryer overheats. If it’s blown, the dryer won’t start. Test the thermal fuse for continuity. If it’s open, replace it.

  6. Inspect Control Board:

    Examine the electronic control board for any burnt components or visible damage. If there are issues with the control board, it may need to be repaired or replaced by a professional technician.

  7. Test Outlet Voltage:

    Use a multimeter to check the voltage at the power outlet. The dryer requires the correct voltage to function properly. If the voltage is incorrect, consult an electrician to address wiring or outlet issues.

  8. Reset the Dryer:

    Some Fisher Paykel dryers have a reset button. Refer to the user manual to locate and press the reset button if applicable.

Keep in mind that electrical and electronic components can be sensitive, and attempting repairs without proper knowledge can be risky. If you’re unsure or uncomfortable with any of the troubleshooting steps, it’s always best to seek assistance from qualified technicians to ensure safety and accurate diagnosis.

Schedule Appointment