Electrolux Dryer Error Code E97

If your Electrolux dryer displays Error Code E97, it indicates a “Program Mismatch.” This error signifies a problem with the electronic control board. Here’s a breakdown of what it means and steps you can take for a potential DIY resolution:

Error Description:

• Program Mismatch: The appliance’s electronic control board, responsible for managing the dryer’s various functions, has encountered a mismatch in its programmed instructions.

DIY Troubleshooting Steps:

1. Unplug the Dryer: As a first step, disconnect the dryer from the power source to ensure safety during troubleshooting.
2. Electronic Control Board Inspection:
   • Check for visible signs of damage on the electronic control board, such as burns or unusual discoloration.
   • Ensure all connections to the board are secure.
3. Power Cycle:
   • Perform a simple power cycle by leaving the dryer unplugged for at least 5-10 minutes.
   • Reconnect the dryer to the power source and check if the error persists.
4. Consider Replacement:
   • If the error persists after basic troubleshooting, it may indicate a defective electronic control board.
   • Replacement of the electronic control board may be necessary. Consult your appliance’s manual for information on obtaining a compatible replacement part.
5. Professional Assistance:
   • If you are uncomfortable or unsure about replacing the electronic control board, it is advisable to seek professional assistance. Contact the appliance manufacturer or a certified technician for guidance.

Note: DIY troubleshooting steps are provided for informational purposes. Ensure your safety and adhere to the manufacturer’s guidelines. If in doubt or if the issue persists, consulting a professional technician is recommended.

By understanding the nature of Electrolux Dryer Error Code E97 and following these steps, you can attempt to address the issue on your own. However, always prioritize safety and, when in doubt, seek expert advice.