Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Electrolux Dryer Error Codes

Electrolux Dryer Error Code E52

Electrolux Dryer Error Code E52 indicates a situation where the motor has either stopped or is not starting. This can occur due to overloading, which may lead to the drive motor overheating and triggering a thermal protector.

If you encounter this error, follow these steps to troubleshoot and potentially resolve the issue:

  1. Reduce Load and Allow Cooling: Overloading the dryer can overheat the drive motor. Reduce the load and let the motor cool off for at least 30 minutes before attempting to restart the dryer.
  2. Check Drum Movement: After cooling, check if the drum turns freely by hand. If it doesn’t, unplug the dryer and inspect the drive system for any visible damage. Replace any damaged drive components.
  3. Inspect Motor Wire Harness: Examine the motor wire harness for any loose connections or damage. Reconnect any loose wires, or replace the wire harness if it shows signs of wear or damage.
  4. Assess Drive System: If the drive system and wire harness appear to be in good condition, you may need to consider replacing the drive motor itself.

By following these steps, you can systematically troubleshoot Electrolux Dryer Error Code E52 and potentially address the underlying issue. Keep in mind that safety precautions, such as unplugging the dryer before inspection, should always be observed. If the problem persists or if you’re uncertain about performing these steps, it is advisable to consult a professional technician for further assistance.

Schedule Appointment