Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Amana Oven Error Codes

Amana Oven / Ranges Error Code F7

If your Amana electric oven or range displays the error code F7, it indicates a potential issue with a shorted or sticking button. This error can disrupt the normal functioning of your appliance and may require attention to restore it to proper operation. Here’s a step-by-step guide to troubleshooting and resolving the F7 error code on your Amana appliance:

Check Glass Alignment:

The F7 error code may be triggered by misalignment in the glass panel or the touchpad. Inspect the alignment of the glass and ensure that it is correctly positioned. If there are any visible issues with alignment, gently adjust the glass to ensure it sits properly in place.

Inspect Buttons for Sticking:

Examine the control buttons on the touch panel for any sticking or jamming. A sticking button can send inaccurate signals to the oven’s control board, triggering the F7 error. Carefully press each button to ensure they respond smoothly without sticking.

Clean the Touch Panel:

Over time, dirt, grease, or debris may accumulate on the touch panel, leading to false button presses and triggering error codes. Clean the touch panel thoroughly using a mild household cleaner and a soft cloth. Ensure that the buttons are free from any residue that could interfere with their operation.

Power Cycle the Appliance:

Turn off the power to your Amana electric oven or range by unplugging it or switching off the circuit breaker. Leave it powered down for a few minutes to allow the control board to reset. Afterward, restore power and check if the F7 error persists.

Replace Touch Panel if Necessary:

If the F7 error persists after performing the above steps, it may indicate a more significant issue with the touch panel. In such cases, consider replacing the touch panel with a compatible and genuine Amana replacement part. Consult your appliance’s manual or contact Amana customer support for guidance on obtaining the correct replacement.

By following these do-it-yourself solutions, you can address the Amana Electric Oven/Range Error Code F7 related to a shorted or sticking button. If the issue persists or if you’re unsure about the troubleshooting process, it’s advisable to seek professional assistance from Appliance Repair Los Angeles

Schedule Appointment