Call (323) 792-1970
Customer service:    323-792-1970
Schedule Appointment
Amana Dryer Error Codes

Amana Dryer Error Code L2

If your Amana dryer displays the L2 error code, it indicates a low or no line voltage situation. This problem may stem from issues in your home’s power supply, preventing the dryer’s heater from activating. It’s important to note that the dryer will continue to run despite this diagnostic code. To clear the code and return to the estimated time remaining, simply touch any pad.

Possible Causes:

  • Initial Installation Issue: The L2 error is typically encountered during the initial installation phase.

Troubleshooting Steps:

  1. Check Household Fuse or Circuit Breaker:

    • Electric dryers use two household fuses or breakers. Ensure none of them has blown or tripped.
    • If an issue is detected, replace the fuse or reset the circuit breaker.
  2. Verify Power Cord Installation:

    • Confirm that the power cord is correctly installed. Refer to the Installation Instructions for detailed guidance.
  3. Restart the Dryer:

    • Select a Timed Dry heated cycle and restart the dryer to see if the error persists.

Important Note: The L2 error code is more common during initial installation and may not recur after the setup phase.

If the error message persists despite your troubleshooting efforts, it is advisable to consult a qualified electrician. They can assess and address any underlying issues with the power supply.

Schedule Appointment